Finally snagged a great deal on a Nord Lead 2X, and we just got a Trance soundset for it up!
By the looks of things, it’s the very first fully dedicated Trance soundbank for the 2 and 2X ever made by anyone, so if you’ve been wanting some solid NL2/X sounds for your productions, now we have some available!
And what’s more, is these patches will also load into the DiscoDSP Discovery VSTi! So All you Discovery users can use these sounds in your songs too!
Clinical. Cold. Thin. These comments tend to commonly pop up in reviews and comments about the now-20-year-old 24-voice Nord Lead 3 virtual analog polysynth by Swedish keyboard company Clavia. Frequently overlooked for its younger sibling the Nord Lead 2 (and the later 2X), the NL3 is a synth that garners criticism for not sounding analog enough and having weak factory presets, yet also receives high praise for other aspects of its sound and design that race ahead of its competitors. It’s a synth that folks seem to either love or hate.
So is the NL3 still worthit in the 2020s? Should you get one?
Let’s have a look.
At first glance, the NL3 looks fairly simple and minimalist, with on 2 oscillators to generate sound. But digging a little further into the panel, one will find not merely the usual analog-style Sawtooth, Pulse, and Triangle waveforms, but also Sine, Noise, and Dual Sine oscillators that open up sound design possibilities far beyond the typical early 2000s VA.
In fact, it’s the Sine and Dual Sine oscillators that transform the NL3 from a typical VA. When engaged, the NL3 can become a 4 operator FM synth, with the push of a few buttons. So for DX style pianos, clangorous bells, hollow slap house basses, or ripping dubstep wobbles, this synth opens up a world of possibility with very little tweaking. It has in fact, one of the easiest FM implementations of any hardware synth on the market. And you can use any of the waveforms for FM, which provides many opportunities to make new and never-before-heard sounds.
The standard waveforms are what you’d expect, and the detune and pitch controls are easy to use and sound sweet. As far as how they sound, some say they sound thinner or less aggressive than the NL2’s, but we find that it sounds like a midpoint between the Prophet Rev2 and the Blofeld, with a bit more leaning toward the Rev2. They don’t sound Analog in the Moog sense with heavy low-mid saturation (although there are settings built into the synth to make it sound more analog), but they do have that bright slightly fizzy (but not brassy) analog quality of the Sequential synths - making the NL3 perfect for plucks, leads, and midrange basses, as well as huge pads.
Manipulating the pulse width is pleasant and yields very nice crisp sounds, and the Noise generator can lend a little nice extra air to a sound when the OSC MIX is dialed in right.
The OSC MOD section is where a lot of the fun happens. each of the settings will send you down fun rabbit holes of Frequency Modulation, Distortion Modulation, Ring Modulation, Differential Frequency Modulation, Distortion, Filter Frequency Modulation, and experiment with them on different oscillators. Anything from 80’s FM bells to filthy riddim snarls can be managed here, as well as crazy atonal pads and effects.
Sporting the 3 basic Filter types, plus 3 additional ones (one of which is a 12 dB Distortion filter), with 3 different filter slopes, Filter 1 is more or less what you’re expect from a VA synth of the era. Tight, clean, and has a Resonance that can make for nice and squelchy sounds, but doesn’t quite self resonate (although you can get nearly there in Classic mode, which is a filter intended to emulate the Moog Ladder Filter).
What’s truly unusual about the NL3’s filters is the secondary Multi Filter. It essentially acts like a series of comb and multi-pass filters that combine different curves, and can yield some exciting sounds and effects with a little tweaking.
The standard filters can be a little steppy during sweeps, but compared to the JP8000 that came out a few years earlier, it’s much smoother, and has the added bonus of not adding any weird artifacts to the sound, so you can make super tight warm plucks and bouncy basses with ease.
Analog purists may be disappointed at the lack of full self-oscillation at high resonance settings, but for most dance music producers, it’s not that crucial of a feature.
There’s really not too much to say here. The ADSR envelopes are typical of any VA, and behave similarly to any other.
Now we get into some fun. A decent number of parameters can be modified by the 2 onboard LFOs, and besides the standard free-running lfo speed, they can also be clock synced, and any of the timing and amount parameters can be linked to the modwheel, so you can do on-the-fly sound manipulation.
Each LFO modifies slightly different parameters though, so you’ll need to be choosy about what you modify, and how.
There are loads of LFO waveform types which is nice, but sadly it does not have a Sine wave type, so you can’t get as smooth of a curve as you might like for certain classes of sounds. But the smooth random and other waveforms are great for chaotic psychedelic textures.
An interesting note is that Pan will modulate the stereo position of the entire sound on patches that are Mono/ not in Unison. When Unison Stack is turned on and some detune is applied, the Pan will modulate the sound semi-randomly on a Per-Voice and Per-Note basis, creating wide, spread out stereo movement that doesn’t feel overly Binaural-y. It’s great for large unison pads when you want to expand the stereo field further. When using LFO modulation on a pluck or other non-Unison sound, the patch will behave more like on other synths, with the sound bouncing back and forth across the stereo field evenly.
This section is rather limited. A very basic AD envelope lets you modulate a handful of standard parameters. It’s helpful for making nice plucky pitchy sounds and for some clever pulse width modulation effects. Those are mainly what we use it for.
In general, the Nord Lead 3 doesn’t really have any effects, per se. The Distortion Filter, and the DIST in the OSC MOD sections sort of quality as effects, and they are quite nice for adding saturation and crunchy distortion for basses and acid and dubstep sounds. Pairing the distortion with the FM yields some fantastic ripping growls and snarls that put Massive and Serum to the test.
Many folks discounted the NL3 when it first came out because of its lack of onboard FX, when competitors like the Virus, SuperNova, Q, and even the JP8080 had good onboard effects. By comparison, the NL3 is super bare bones.
Within our studio however, we have found it to be highly capable, and we have no trouble envisioning how it will sound in a song, because we have our NL3 routed into a Virus TI2, and so as we design and review sounds for songs, we can switch on some reverb, delay, phaser, chorus, or whatever else we want, and have a clear idea of how the sound will fit in the final mix (we do of course, record Dry once we have everything set the way we like on the NL).
And finally, we come to the Unison section. This is one of the features the NL3 is best known for, and for good reason. It adds an extra 4 voices on top of the base sound, for a total of 5 voices, which spread over the stereo field as you increase the detune. And the best part? It doesn’t impact polyphony.
So you can make huge pads and unison leads and still have 24 voices to work with!
The Mono, Glide, and other sections are fairly standard as with other VAs, so there’s not much to tell there. The tight filters and bright cutting oscillators do mean that gliding leads and leads with some pitch mods have a lot of energy in them, which is nice.
It’s worth mentioning that just below this section lurks the Performance and some extra modulation controls - the Performances let you load up different patches into each section for quick recall, or even play multiple sounds at once (or stack the same patch 2-4 times!) and achieve huge monster sounds that still have loads of polyphony to play around with.
So for you Trance producers, you could effectively make a window-shattering 4 layer multi-octave SuperSaw Pad, or layer a couple leads and plucks together and not have to worry about note timing issues between each layer while recording parts.
And the stone Modwheel can be linked to any parameter, and to multiple parameters at once, giving you almost Blofeld-like sound manipulation capabilities.
The wooden thumb-operated pitch bend gizmo is a pretty neat touch. It’s very unique, and in some ways even more useful than the standard pitch wheel on other synths.
Some of you may be wondering how the Arpeggiator sounds, and it’s nice. I will admit I rarely ever use the built-in arps on hardware synths, but this one sounds nice, and there’s submenu options for tweaking it further, but I must confess I haven’t really fussed with them (as I do most of my arranging ITB).
So, at the end of all things, is the Nord Lead 3 still worthit? There are certainly other VAs and digital synths out there with more FX, more voices, and more bells and whistles, some for less money.
However.
The NL3 has hands on controls unrivaled by anything except a handful of analog mono synths.
It has unison capabilities that are superior to most of its competitors.
It balances the cleanness of VA/ digital with the fatness of analog for a bright sound that isn’t overwhelming.
As a keyboard (which is what we have), its keybed feels great, and it’s a joy to design sounds on the fly with. So if you have ambitions of bringing a live Trance/ Psytrance/Dubstep act to the world stages, pairing the NL3 with some outboard FX units would take this synth to a whole new level and make it the centerpiece of your live rig (plus, it looks super cool on stage, too).
Still worthit today?
Totally.
Hear it in action:
Analog synths? Virtual Analog synths? Digital? Virtual synths? There's so much out there, and so much contradictory information, you might be feeling a little overwhelmed right now.
If you're new to synthesizers, or music production in general, and have been browsing forums and Facebook groups, you might be feeling a little lost right now…
Read More