Clavia Nord Lead 2X Review 2024

Bright. Sharp. Aggressive. Cold. Common comments made about the Nord Lead 2X, the successor to the famous Nord Lead 2 that came out in 1997. The 2X came out in 2003, and improved on the original with expanded polyphony, more user memory, and upgraded 96 kHz 24-bit DACs. Some users complained that it sounded a bit too ‘clean’ compared to the 2 and the 1, and that it sounds dated compared to more modern synths.

But with analog and VA synths becoming trendy again, and music reverting to the 90s in style and mood, it seems like the Nord Lead 2X may be swept up in the revival.

So is it still worthit in 2024? Let’s find out.

---

OSCILLATORS

At first, the 2X looks simple and straightforward enough. Conventional analog waveforms like the Triangle, Sawtooth, and Pulse come standard on both Oscs, but Oscillator 1 also includes a Sine wave, and Osc 2 has Noise available, whose color can be brightened or dulled by turning the Semitones knob.

The Pulse Width can also be modulated, but unlike on the Nord Lead 3, or most other analog-modeling synths, the Pulse Width is a Master control, so turning the knob or linking PW to an LFO or the Modulation section affects the Pulse Width for pulse waves on both oscillators at the same time and the same way. There is no Pulse Width variability per oscillator to add complexity, which can be a little frustrating if you want to create more complex pulse-based tones.

However, one area the 2X shines is in the FM capabilities. By jumping between oscillators, and playing with semitones and adjusting the FM, you can create some convincing-sounding DX-like tones on it, and I even managed to recreate some classic DX7 slap bass style sounds on it fairly easily.

The Sync and Ring Mod behave more or less like normal for any synth, and I personally have very little use for them, since they don’t factor into genres of music I write.

Now the big question you’re all wondering is, “How does it sound?” And the answer is:

Excellent.

The saws and pulses are bright, pop, and full of harmonics that become fizzier higher up the keyboard you go, so midrange basses, plucks, and bright detuned leads have a very pleasing musical quality to them that cuts through a mix without being too in-your-face, and the sines and triangles are also good and clean, and lend themselves well to all manner of crazy FM tones.

The Fine Tune detuning between Osc 1 and 2 has a somewhat odd and uneven curve to it, as it seems to detune more rapidly and aggressively turned clockwise, and less aggressive detuned counter-clockwise. It can be helpful when trying to make 80s leads that are detuned by small increments, but it takes a little getting used to.

Some folks complain that the synth doesn’t sound “fat” enough on its own. And compared to a Moog, it doesn’t. But for a modern dance mix, that lack of heavy fatness is a blessing in disguise, as it requires little to no processing to sit cleanly in a mix. These oscillators are definitely the big strong point of this synth.

---

FILTERS

Now on to one of the other big critical elements of the 2X. The filter. It’s an analog-modeling subtractive synth. Does it sound analog?

The answer there, is yes, and no.

It’s not analog in the same way the Moog ladder filter is analog, in its sound. The tightness of the envelopes and the overall tone and behavior of the filter feels more in line with the Prophet Rev2, and so like the Rev2, it’s great for plucks and super snappy sounds. But juicy round 80s and funk basses can be accomplished on it with minimal effort. But it isn’t the same super round, mildly saturated filter tone that a Slim Phatty puts out. And the Resonance doesn’t quite hit as nicely on the 2X as it does on the Moog. Again, it’s more like the Rev2 in that arena.

The different filter modes are also quite nice, and the different Lopass modes are musical and pleasing, and the Hipass, Bandpass, and Notch+LP are fun and offer useful sound-sculpting capabilities.

What IS extra nice, is that it has not only a Velocity on/off button (a control knob for variable velocity mod amount would have been nice, but it’s fine as it is), and multi-level Keyboard Tracking for the filter. So for melodic toplines, midrange basslines, and arpeggios, you can really add some energy and life to your riffs with the push of a button.

The filter does have its own character that sets it apart from other VAs like the JP8000, and so it lends well to making plucks, plucky basses, and short sounds with low cutoffs that the JP can’t manage due to the filter snap baked into the sound of the JPs. For trance plucks and basses, the 2X is pretty hard to beat

---

AMPLITUDE

Not really too much to say here. Standard ADSR envelope and Gain to be found here. Same nice and tight behavior as with the filter.

---

LFO

Fairly standard LFOs to be found here, although I must confess, having used the Blofeld, TI2, and Mininova, the LFO routing options and waveform choices on the 2X feel really restricted. convincing Dubstep and DnB wobbles are a challenge with these since they don’t have a Sine waveform option, and the number of potential routings is pretty small. However, for more standard types of basic modulations, it’s adequate. The Nord Lead 3 definitely spoils you a lot more with options.

---

MODULATION

This is another somewhat weak point of the synth. The settings are fairly typical, and the same can be found on the NL3, and Slim Phatty, and so on. But the inability to link the Mod envelope to more than 3 sources, and the pitch only being for Osc 2, seems like an oversight. Being able to modulate the master pitch, or fade in the LFO amount or Rate would have been helpful. At least the Pulse Width can be modded using these parameters, so I can make some of my favorite types of pluck sounds with it.

---

EFFECTS

Like all the early Nord Lead keyboards, the only FX you ever get is Distortion. On the NL3, that came with an adjustable level, which you could pair with the Moog style filter for screaming acid sounds, On the 2X, it isn’t much more than a saturator that soft clips the sound and adds some gain. If you want really crunchy screaming distortion, you’re going to need to run this through external FX.

Having said that, once you run this synth through some reverb and delay, or phaser, it really starts to shine. Dry, it sounds a bit lifeless. but once you add in FX like you would use in a final track, the synth comes to life.

---

UNISON

And so we come to the Unison. One of the most famous and beloved features of the 2 and 2X. Activating it turns on 2 voices per key pressed, which if you use Poly mode and play chords, creates some nice fat sounds that have a very pleasant stereo spread. By digging into a Special submenu using the Shift key, you can change the Detune amount for the Unison, to create more extreme effects. Great for Trance and Psytrance pads, and wide, detuned leads.

---

CONCLUSION

So here at the end of all things, the question arises:

Is the Nord Lead 2X still worth the money? Is it worth getting? Will it still be useful in music today?

In this sound designer and musician’s opinion, yes.

While it lacks the fearsome modulation options of a TI2 or a Blofeld, and it can’t pull off huge SuperSaws like the JP8080, nor the super heavy tones of a Moog, the Nord Lead 2X still excels at bright, punchy, bold leads, plucks, and basses, that you can record dry, add whatever reverb or delay you need to for the sound, and minor subtractive EQing to balance it, and that’s it.

Its sound fits in any mix, and with careful adjustments to the Velocity and keyboard tracking, this synth will add rich musical depth to your song that many newer synths lack. What it’s missing in mod options, it makes up for with a characterful sound that can be as modern or retro as you like.

Modern Techno and Classic Trance producers in particular will find it useful for bright plucks, and bold punchy analog-style stab sounds - and tight rolling basses.

It’s definitely worthit and it has been a reliable stalwart in several of my most recent songs, and forms the foundation of their most engaging sounds. My 2X will accompany my JP and Virus with me to my grave.

You can also attain the same sound in VST format using the discoDSP Discovery VSTi

Hear it in action:

Clavia Nord Lead 3 Review 2021

Clinical. Cold. Thin. These comments tend to commonly pop up in reviews and comments about the now-20-year-old 24-voice Nord Lead 3 virtual analog polysynth by Swedish keyboard company Clavia. Frequently overlooked for its younger sibling the Nord Lead 2 (and the later 2X), the NL3 is a synth that garners criticism for not sounding analog enough and having weak factory presets, yet also receives high praise for other aspects of its sound and design that race ahead of its competitors. It’s a synth that folks seem to either love or hate.

So is the NL3 still worthit in the 2020s? Should you get one?

Let’s have a look.

---

OSCILLATORS

At first glance, the NL3 looks fairly simple and minimalist, with on 2 oscillators to generate sound. But digging a little further into the panel, one will find not merely the usual analog-style Sawtooth, Pulse, and Triangle waveforms, but also Sine, Noise, and Dual Sine oscillators that open up sound design possibilities far beyond the typical early 2000s VA.

In fact, it’s the Sine and Dual Sine oscillators that transform the NL3 from a typical VA. When engaged, the NL3 can become a 4 operator FM synth, with the push of a few buttons. So for DX style pianos, clangorous bells, hollow slap house basses, or ripping dubstep wobbles, this synth opens up a world of possibility with very little tweaking. It has in fact, one of the easiest FM implementations of any hardware synth on the market. And you can use any of the waveforms for FM, which provides many opportunities to make new and never-before-heard sounds.

The standard waveforms are what you’d expect, and the detune and pitch controls are easy to use and sound sweet. As far as how they sound, some say they sound thinner or less aggressive than the NL2’s, but we find that it sounds like a midpoint between the Prophet Rev2 and the Blofeld, with a bit more leaning toward the Rev2. They don’t sound Analog in the Moog sense with heavy low-mid saturation (although there are settings built into the synth to make it sound more analog), but they do have that bright slightly fizzy (but not brassy) analog quality of the Sequential synths - making the NL3 perfect for plucks, leads, and midrange basses, as well as huge pads.

Manipulating the pulse width is pleasant and yields very nice crisp sounds, and the Noise generator can lend a little nice extra air to a sound when the OSC MIX is dialed in right.

The OSC MOD section is where a lot of the fun happens. each of the settings will send you down fun rabbit holes of Frequency Modulation, Distortion Modulation, Ring Modulation, Differential Frequency Modulation, Distortion, Filter Frequency Modulation, and experiment with them on different oscillators. Anything from 80’s FM bells to filthy riddim snarls can be managed here, as well as crazy atonal pads and effects.

---

FILTER

Sporting the 3 basic Filter types, plus 3 additional ones (one of which is a 12 dB Distortion filter), with 3 different filter slopes, Filter 1 is more or less what you’re expect from a VA synth of the era. Tight, clean, and has a Resonance that can make for nice and squelchy sounds, but doesn’t quite self resonate (although you can get nearly there in Classic mode, which is a filter intended to emulate the Moog Ladder Filter).

What’s truly unusual about the NL3’s filters is the secondary Multi Filter. It essentially acts like a series of comb and multi-pass filters that combine different curves, and can yield some exciting sounds and effects with a little tweaking.

The standard filters can be a little steppy during sweeps, but compared to the JP8000 that came out a few years earlier, it’s much smoother, and has the added bonus of not adding any weird artifacts to the sound, so you can make super tight warm plucks and bouncy basses with ease.

Analog purists may be disappointed at the lack of full self-oscillation at high resonance settings, but for most dance music producers, it’s not that crucial of a feature.

---

AMPLITUDE

There’s really not too much to say here. The ADSR envelopes are typical of any VA, and behave similarly to any other.

---

LFO

Now we get into some fun. A decent number of parameters can be modified by the 2 onboard LFOs, and besides the standard free-running lfo speed, they can also be clock synced, and any of the timing and amount parameters can be linked to the modwheel, so you can do on-the-fly sound manipulation.

Each LFO modifies slightly different parameters though, so you’ll need to be choosy about what you modify, and how.

There are loads of LFO waveform types which is nice, but sadly it does not have a Sine wave type, so you can’t get as smooth of a curve as you might like for certain classes of sounds. But the smooth random and other waveforms are great for chaotic psychedelic textures.

An interesting note is that Pan will modulate the stereo position of the entire sound on patches that are Mono/ not in Unison. When Unison Stack is turned on and some detune is applied, the Pan will modulate the sound semi-randomly on a Per-Voice and Per-Note basis, creating wide, spread out stereo movement that doesn’t feel overly Binaural-y. It’s great for large unison pads when you want to expand the stereo field further. When using LFO modulation on a pluck or other non-Unison sound, the patch will behave more like on other synths, with the sound bouncing back and forth across the stereo field evenly.

---

MODULATION

This section is rather limited. A very basic AD envelope lets you modulate a handful of standard parameters. It’s helpful for making nice plucky pitchy sounds and for some clever pulse width modulation effects. Those are mainly what we use it for.

---

EFFECTS

In general, the Nord Lead 3 doesn’t really have any effects, per se. The Distortion Filter, and the DIST in the OSC MOD sections sort of quality as effects, and they are quite nice for adding saturation and crunchy distortion for basses and acid and dubstep sounds. Pairing the distortion with the FM yields some fantastic ripping growls and snarls that put Massive and Serum to the test.

Many folks discounted the NL3 when it first came out because of its lack of onboard FX, when competitors like the Virus, SuperNova, Q, and even the JP8080 had good onboard effects. By comparison, the NL3 is super bare bones.

Within our studio however, we have found it to be highly capable, and we have no trouble envisioning how it will sound in a song, because we have our NL3 routed into a Virus TI2, and so as we design and review sounds for songs, we can switch on some reverb, delay, phaser, chorus, or whatever else we want, and have a clear idea of how the sound will fit in the final mix (we do of course, record Dry once we have everything set the way we like on the NL).

---

UNISON

And finally, we come to the Unison section. This is one of the features the NL3 is best known for, and for good reason. It adds an extra 4 voices on top of the base sound, for a total of 5 voices, which spread over the stereo field as you increase the detune. And the best part? It doesn’t impact polyphony.

So you can make huge pads and unison leads and still have 24 voices to work with!

The Mono, Glide, and other sections are fairly standard as with other VAs, so there’s not much to tell there. The tight filters and bright cutting oscillators do mean that gliding leads and leads with some pitch mods have a lot of energy in them, which is nice.

It’s worth mentioning that just below this section lurks the Performance and some extra modulation controls - the Performances let you load up different patches into each section for quick recall, or even play multiple sounds at once (or stack the same patch 2-4 times!) and achieve huge monster sounds that still have loads of polyphony to play around with.

So for you Trance producers, you could effectively make a window-shattering 4 layer multi-octave SuperSaw Pad, or layer a couple leads and plucks together and not have to worry about note timing issues between each layer while recording parts.

And the stone Modwheel can be linked to any parameter, and to multiple parameters at once, giving you almost Blofeld-like sound manipulation capabilities.

The wooden thumb-operated pitch bend gizmo is a pretty neat touch. It’s very unique, and in some ways even more useful than the standard pitch wheel on other synths.

Some of you may be wondering how the Arpeggiator sounds, and it’s nice. I will admit I rarely ever use the built-in arps on hardware synths, but this one sounds nice, and there’s submenu options for tweaking it further, but I must confess I haven’t really fussed with them (as I do most of my arranging ITB).

---

CONCLUSION

So, at the end of all things, is the Nord Lead 3 still worthit? There are certainly other VAs and digital synths out there with more FX, more voices, and more bells and whistles, some for less money.

However.

The NL3 has hands on controls unrivaled by anything except a handful of analog mono synths.

It has unison capabilities that are superior to most of its competitors.

It balances the cleanness of VA/ digital with the fatness of analog for a bright sound that isn’t overwhelming.

As a keyboard (which is what we have), its keybed feels great, and it’s a joy to design sounds on the fly with. So if you have ambitions of bringing a live Trance/ Psytrance/Dubstep act to the world stages, pairing the NL3 with some outboard FX units would take this synth to a whole new level and make it the centerpiece of your live rig (plus, it looks super cool on stage, too).

Still worthit today?

Totally.

Hear it in action: